Injin sakawa
YH1600 Na'ura mai ɗaukar hoto ta atomatik
Bayani
Wannan layin yana kunshe da 1600T 4-Column Press, Front da Rear Ciyarwa Unit da kuma Latsa Dies.Ya dace da Babban Tonnage Matsi na Antikaid Plate, Anti Slippery Plate, Tread Safety.Na'urar Ana Magance Zafi Na Musamman Kuma An Fasa Ƙwaƙwalwa, Don haka, an cire damuwa ta ciki kuma an Ƙarfafa Sama, wanda zai iya tabbatar da daidaitaccen aiki na dogon lokaci da kuma tsawaita tsawon rayuwar na'urar kanta da ta Mutu.
Ana amfani da wannan na'ura galibi don yin zanen gado, farantin anti-sliding.Frame an yi shi da ƙarfe mai nauyi mai nauyi, an saki damuwa.1600 ton 4 nau'in shafi na Hydraulic Press tsarin Servo zai sarrafa shi.Mutuwar Motsi ta atomatik don sauƙin sauyawa.An yi la'akari da aikin ƙaddamarwa lokacin da aka tsara mutun, wanda zai iya tabbatar da kyakkyawan shimfidar farantin.PLC da HMI don aiki ne mai sauƙi da daidaitawa.Za a yi amfani da kayan motsa jiki, masu ragewa da na'ura mai aiki da karfin ruwa.
Babban Ma'aunin Fasaha
| Gina | Rufe Nau'in | Lura | ||
| Ƙarfin ƙira | KN | 16000 | ||
| Max Sheet Kauri | mm | 6 | ||
| Girman Sheet Max | mm | 1500X6000 | ||
| Daidaiton Ciyarwa | mm | ± 0.2 | ||
| Maimaita Matsayin Madaidaicin Asalin | mm | ± 0.2 | ||
| Matsakaicin Mitar Stamping | Lokaci/min | 10 | ||
| Min Stamping Frequency | Lokaci/min | 6 | ||
| Matsi na Na'ura mai aiki da karfin ruwa | MPa | 20 | ||
| Jimlar Ƙarfin | KW | 100 | ||
| Tsayin Tsarin | mm | 1.2-1.3 | ||
| Material Raw Mai Aiki | Bakin Karfe na 200/300/400 Series | |||
| Nauyin Inji | T | 40 | ||
| Girman Injin | mm | 13500×3300×5300 | ||
Jerin Abubuwan Manyan Abubuwan
| A'a. | Abubuwan da aka gyara | Yi | Lura |
| 1 | Mai ciyarwa | HT | |
| 2 | 4-Labarin Rubutu | Yangli | |
| 3 | Mutu | HT | |
| 4 | Abubuwan da ke huhu | Airtec | |
| 6 | Waƙar layi | Hiwin or ABBA | |
| 7 | Servo Motor Drive | Xinjie | |
| 8 | Allon | Weinview | |
| 9 | PLC | Siemens | |
| 9 | Tsarin Lantarki | HT | |
| 10 | Module | Siemens | |
| 11 | Abubuwan Wutar Lantarki | (1) Canja: Taiwan Mingwei (2) Canjawar kusanci, Relay: Omron | |
| 12 | Motar Asynchronous Mataki-Uku | Shahararren Alamar Gida | |
| 13 | Mai ɗauka | NSK | |
| 14 | Kayan Aikin Ruwa |
Iyakar wadata
| No | Kayayyaki | Takaddun bayanai | Naúrar | Farashin | Q'ty | Lura |
| 1 | Mai ciyarwa | Saita | 1 | |||
| 2 | Latsa | Saita | 1 | |||
| 3 | Mutu | Saita | 1 | Kamar yadda Pattern | ||
| 4 | Hanyoyi | Saita | 1 | |||
| 3 | Kayan aiki na Musamman | No | ||||
| 4 | Shigarwa da Gudanarwa | Shigarwa da Gudanarwa Kyauta | ||||
| 5 | Horowa | Horowa Kyauta | ||||
| 6 | Manual | Disc | ||||
Abubuwan Na'ura
- Babban Ƙarfin Matsawa, Mai Aiki a Babban Iyali
- Mutuwar Mutuwa ta atomatik da Motsawa Aiki, mai sauƙin canza Mutuwa.Ana iya yin Samfuran Daban-daban da yawa gwargwadon buƙatu daga Abokan ciniki.
- Tsarin Ciyarwa ta atomatik, Matsayin atomatik don Mutuwa a ƙasa, kuma yana motsawa bayan Tambari.
Ana buƙatar ikon mutum kawai don matsar da zanen gado zuwa Tebur na Roller da Matsar da Sheets bayan Tambari.Mai aiki ɗaya kawai ake buƙata.
- Mutuwar tana tare da Ayyukan Haɓakawa da Sake Siffata, Za'a iya tabbatar da ƙayyadaddun takaddun takarda bayan Tambari.
Iyalin Mai siye
Samar da Jirgin Sama: 0.6Mpa, 1 M3/min, Dry da Tsabtataccen Matse Iska
Samar da Wutar Lantarki: 415V, 50Hz, Canjin Wutar Lantarki: -10%-+10%
Zafin Kewaye: 0°C - +40°C
Danshi Kewaye: Danshi Mai Dangantaka: 20-80% RH (Ba Namiji)
Kyauta daga Tushen Jijjiga Mai ƙarfi da Tsangwama-Magnetic.
Kyauta daga Kura, Mai cutarwa da Iskar Etching
Ya kamata a yi Foundation Foundation kamar yadda Zane na Gidauniya daga Mai bayarwa.
Madaidaicin kuma Flat S/S Sheets.
Ma'aikacin Barga da Ilimi
Gabatarwar Kamfanin
Tarihin mu:
Kwararre don Flat Surface Abrasives Belt Nika na Karfe: Wannan manufa tana jagorantar mu ci gaba da bincike a cikin nika da gogewa ta filin abrasives mai rufi daga 1990s.
A 2005 mun fara zayyana, masana'antu da kuma harhada m abrasives bel nika inji don karfe.Tare da ci gaba da fadada kasuwancin da kuma canza tsarin masu hannun jari,
a 2015 WUXI Zhongshuo Precision Machinery Co., Ltd aka kafa.
Kamfaninmu:
Mu babban kamfani ne mai matsakaicin girman sarrafawa.Kamfanin yana cikin birnin Wuxi na lardin Jiangsu.Babban jarin da aka yiwa rijista shine RMB miliyan 8.Wurin ginin ya wuce mita 70002.Jimillar ma'aikata 52 ne, ciki har da injiniyan matakin bincike 1, manyan injiniyoyi 2 da injiniyoyi 5.Muna da ƙwararrun ƙira, masana'antu, taro, shigarwa, ƙaddamarwa da ƙungiyar sabis na tallace-tallace.
Kayayyakin mu
Mun samar da fadi da bel nika da polishing inji, brushing inji, madubi karewa inji, vibration gama na'ura, embossing inji for karfe nada da takardar, ciki har da shigarwa da kuma fita sashen na CGL (Coil zuwa Coil Gyara nika Line for Karfe Maker) da kuma CPL (Na'ura). zuwa Layin goge na Coil don Cibiyar Sabis), watau Unwinder, Rewinder, Loading Mota, Fitar Fitar, Fila, Tushen amfanin gona, Tsarin sanyi da tsarin sake amfani da shi, Tsarin wanke-wanke da bushewa, Mai tara Hazo, Tsarin Yaƙin Wuta.Hakanan muna samar da na'urar Loading tare da Rukunin Kofin Vacuum don Sheet to Sheet Grinding Lin
Abokan cinikinmu:
Jerin sunayenmu da suka haɗa da Tisco Daming, Wuxi Puxin, Zhejiang Bohai da sauran sanannun abokan cinikin Sinawa.Mun fitar da samfuranmu zuwa ƙasar Turai kamar Italiya, Turkiyya tare da Takaddun CE.Mun kuma samar da bel calibrating grinder ga ƙera China wanda ke ba da kayan ga Jirgin sama da Nukiliya In.
Takaddarwar Mu
Ayyuka
Don ƙirƙirar ƙima ga abokin ciniki shine ci gaba da bi.Gamsar da ku shine ikon ci gaba da sabbin abubuwa.
CPL-Coil zuwa Layin Polishing don Cibiyar Sabis ɗin Bakin Karfe
Abokin ciniki:浦新金属
Ana amfani da CPL musamman don kawar da ƙananan lahani a cikin sanyi mai birgima SS coil a cikin rigar, samun kammala kayan ado, watau No.3, No.4, HL, SB & Duplo.Mai sanyaya na iya zama emulsion ko man ma'adinai.Tsarin tacewa mai sanyi da tsarin sake amfani da su yana da mahimmanci ga cikakken layin.ZS CPL an ƙera shi don mirgina mai sanyi zuwa sarrafa nada daga 100 zuwa 1600 mm faɗi da kauri tsakanin 0.4 zuwa 3.0 mm.WUXI ZS kuma tana ba da bushewar CPL.Za a yi amfani da bel ɗin Cork don samun kammala kama da Scotch-Brite finishing (SB), saurin ciyar da bushewar CPL na iya zama 50m/min ko fiye.
SPL-Sheet zuwa Layin goge-goge (Nau'in Rigar)
Abokin ciniki:太钢大明
Sheet to Sheet nika inji (Wet Type) yana amfani da Man niƙa ko Emulsion azaman Mai jarida don cimma sakamako mai kyau kuma mai sheki akan ko dai zafi ko sanyi birgima na bakin karfe ko coils.An tsara injin don ƙarewa A'a dogon layi).ZSSAn tsara PL don sanyitakardar zuwa takardar niƙasarrafa daga600 ku2200 mm nisa da kauri tsakanin 0.4 zuwa 3.0 mm.
Layin Niƙa na PGL don Babban Faranti
Abokin ciniki:西部金属
Cikakken niƙa ta atomatik da Layin goge baki ana amfani da shi musamman don kawar da lahani daga yin birgima mai zafi, ƙwanƙwasa & aiwatar da cirewa da sikelin saura, da cimma kauri da ƙima da ake buƙata.Mai sanyaya na iya zama emulsion ko man ma'adinai.Tsarin tacewa mai sanyi da tsarin sake amfani da su yana da mahimmanci ga cikakken layin.ZSPGLAn tsara shi don sarrafa faranti mai zafi mai zafi daga 600 zuwa 2200 mm nisa da kauri tsakanin 1.0 zuwa 30 mm.WUXI ZS kuma yana ba da PGL bushe.
Injin Ƙarfe (8K) don Bakin Karfe Plate
Abokin ciniki:新华医疗
Fa'idar WUXI 25 Injin Kammala Madubi don Bakin Karfe Coil da Sheet.Shuwagabannin gogewa na kowane rukuni na iya zama masu zaman kansu ko kuma a haɗa su litashi sama da ƙasa .Cibiyar Refiling na polishing fili don kauce wa saman karkashin polishing disc samu burnt.Bakin karfe da aka yi .Anti lalata da tsayirayuwa.Motsi mai laushi mai laushi ta jagorar madaidaiciya.
Injin Kammala madubi don Cold Rolling Coil da Sheet
CLIENT:MINOX(INDIA)
Nau'in nadi.Yana amfani da guduro bonded dabaran nika, Scotch-Brite Disc, polishing fili wanda ya ƙunshi 5% Al2O3 + 5% nitric acid + 90% ruwa don inganta yanayin roughness mataki-mataki, a ƙarshe za a iya samun kammala babban madubi (8K).
Na'urar Loadwa/Aiki ta atomatik tare da Rukunin Kofin Vacuum
Abokin ciniki:博海金属
Ya ƙunshi firam ɗin gantry da aka yi da welded, carbon karfe da girman da ya dace don tallafawa damuwa na aiki.Na'urar ta ƙunshi ƙungiyoyi masu zuwa: Naúrar Fassara, Naúrar ɗagawa, Naúrar ɗaukar Vacuum.
Ƙungiyar fassarar tana jagorancin jagorar layi, wanda motar servo ke motsa ta ta kayan aiki da pinion.Ƙungiyar ɗagawa tana jagorancin jagorar layi, wanda piston pneumatic ke motsawa.Nau'in karban yana kunshe da sandunan riko guda 3 masu daidaitawa tare da kofuna na tsotsa guda 18, sandar tana cikin tsayayyen wuri amma kowane kofin tsotsa zai iya motsawa a tsayi, mai aiki zai iya sakin kayan aiki, daidaita matsayin kofin tsotsa, sake kullewa. daidaitawa sauƙi.
Kowane kofin tsotsa yana da alaƙa da bututun huhu na mutum don tabbatar da ingantaccen aiki na tsarin, kowane kofin tsotsa yana da alaƙa da arbor na bazara don tabbatar da isasshen sarari tsakanin kofuna da yanki na aiki.
Laminator Na atomatik don Kariyar Fim (Na'urar Rufe PVC)
Abokin ciniki: LAUNIN KARFE(ITALIYA)
Ana amfani da na'urar laminator ta atomatik / na'ura mai rufi na PVC musamman don Lamincin Fim akan saman Sheet.Ana iya ƙera shi don Laminating Layer na gefe biyu.
Lamination ta atomatik, Yanke ta atomatik.
* Yanayin Inji: 400-2500 Nau'in
* Nisa Mai Aiki: 400-2500MM
* Gudun Aiki: Kafaffen Gudun Gudun Daidaitacce
* Aikace-aikace: Ana amfani da wannan na'ura galibi a cikin Coiler/De-coiler System,
Injin goge goge, Injin goge madubi na 8K, Yanke zuwa Layi mai tsayi,
Injin Niƙa da dai sauransu.
* Injin na iya zama wanda aka kera.