Kayayyakin taimako don naɗa zuwa layi
Ana amfani da CPL musamman don kawar da ƙananan lahani a cikin sanyi mai birgima SS coil a cikin rigar, samun kammala kayan ado, watau No.3, No.4, HL, SB & Duplo.Mai sanyaya na iya zama emulsion ko ma'adinai.Tsarin tacewa mai sanyi da tsarin sake amfani da su yana da mahimmanci ga cikakken layin.ZS CPL an ƙera shi don mirgina mai sanyi zuwa sarrafa nada daga 100 zuwa 1600 mm faɗi da kauri tsakanin 0.4 zuwa 3.0 mm.
WUXI ZS kuma tana ba da bushewar CPL.Za a yi amfani da bel ɗin Cork don samun kammala kama da Scotch-Brite finishing (SB), saurin ciyar da bushewar CPL na iya zama 50m/min ko fiye.
Farashin ZS CPL
1. Mai ba da bayani, ZS yana ba da cikakken layin ciki har da Unwinder, Rewinder, Loading Car, Pinch Roll, Flattener, Fure Shear, Wankewa da Tsarin bushewa, PVC coater.A lokaci guda muna samar da Coolant Filtration and Recycling System, Mist
2. Mai tarawa, Tsarin Yaƙi na Wuta da Injin Briquetting.
3. Babu lahani da alamar zance daga layi
4. Saurin layi har zuwa 40m / min max.
5. Line ya dace da 24 hours ci gaba da samarwa
6. Babban matakin Automation, watau Constant Load.Welding Seam Tracking System (na zaɓi tare da walda)
7. Aiki da tabbatarwa abokantaka
Bayanan layi
| Nau'in kayan aiki: | Bakin karfe coils | |
| Ƙarfin jujjuyawar kayan abu: | N/mm2 | -850 |
| Min / Max kauri: | mm | 0.4 - 3 |
| Nisa min/max: | mm | 600-1600 |
| Matsakaicin nauyin coil a wurin shigarwa: | t | 30 |
| Shigar coil diamita na waje min/max: | mm | 1000-2100 |
| Shigar coil diamita na ciki: | mm | 508/610 |
| Matsakaicin nauyin coil a wurin fita: | t | 30 |
| Fitar da diamita na coil min/max: | mm | 1000-2100 |
| Fitar da diamita na ciki: | mm | 508/610 |
| Gudun layi: | m/min. | Max.40 don sakewa.5-35m / min don sarrafawa |
Gabatarwar Kamfanin
Tarihin mu:
Kwararre don Flat Surface Abrasives Belt Nika na Karfe: Wannan manufa tana jagorantar mu ci gaba da bincike a cikin nika da gogewa ta filin abrasives mai rufi daga 1990s.
A 2005 mun fara zayyana, masana'antu da kuma harhada m abrasives bel nika inji don karfe.Tare da ci gaba da fadada kasuwancin da kuma canza tsarin masu hannun jari,
a 2015 WUXI Zhongshuo Precision Machinery Co., Ltd aka kafa.
Kamfaninmu:
Mu babban kamfani ne mai matsakaicin girman sarrafawa.Kamfanin yana cikin birnin Wuxi na lardin Jiangsu.Babban jarin da aka yiwa rijista shine RMB miliyan 8.Wurin ginin ya wuce mita 70002.Jimillar ma'aikata 52 ne, ciki har da injiniyan matakin bincike 1, manyan injiniyoyi 2 da injiniyoyi 5.Muna da ƙwararrun ƙira, masana'antu, taro, shigarwa, ƙaddamarwa da ƙungiyar sabis na tallace-tallace.
Kayayyakin mu
Mun samar da fadi da bel nika da polishing inji, brushing inji, madubi karewa inji, vibration gama na'ura, embossing inji for karfe nada da takardar, ciki har da shigarwa da kuma fita sashen na CGL (Coil zuwa Coil Gyara nika Line for Karfe Maker) da kuma CPL (Na'ura). zuwa Layin goge na Coil don Cibiyar Sabis), watau Unwinder, Rewinder, Loading Mota, Fitar Fitar, Fila, Tushen amfanin gona, Tsarin sanyi da tsarin sake amfani da shi, Tsarin wanke-wanke da bushewa, Mai tara Hazo, Tsarin Yaƙin Wuta.Hakanan muna samar da na'urar Loading tare da Rukunin Kofin Vacuum don Sheet to Sheet Grinding Lin
Abokan cinikinmu:
Jerin sunayenmu da suka haɗa da Tisco Daming, Wuxi Puxin, Zhejiang Bohai da sauran sanannun abokan cinikin Sinawa.Mun fitar da samfuranmu zuwa ƙasar Turai kamar Italiya, Turkiyya tare da Takaddun CE.Mun kuma samar da bel calibrating grinder ga ƙera China wanda ke ba da kayan ga Jirgin sama da Nukiliya In.
Takaddarwar Mu
Ayyuka
Don ƙirƙirar ƙima ga abokin ciniki shine ci gaba da bi.Gamsar da ku shine ikon ci gaba da sabbin abubuwa.
CPL-Coil zuwa Layin Polishing don Cibiyar Sabis ɗin Bakin Karfe
Abokin ciniki:浦新金属
Ana amfani da CPL musamman don kawar da ƙananan lahani a cikin sanyi mai birgima SS coil a cikin rigar, samun kammala kayan ado, watau No.3, No.4, HL, SB & Duplo.Mai sanyaya na iya zama emulsion ko man ma'adinai.Tsarin tacewa mai sanyi da tsarin sake amfani da su yana da mahimmanci ga cikakken layin.ZS CPL an ƙera shi don mirgina mai sanyi zuwa sarrafa nada daga 100 zuwa 1600 mm faɗi da kauri tsakanin 0.4 zuwa 3.0 mm.WUXI ZS kuma tana ba da bushewar CPL.Za a yi amfani da bel ɗin Cork don samun kammala kama da Scotch-Brite finishing (SB), saurin ciyar da bushewar CPL na iya zama 50m/min ko fiye.
SPL-Sheet zuwa Layin goge-goge (Nau'in Rigar)
Abokin ciniki:太钢大明
Sheet to Sheet nika inji (Wet Type) yana amfani da Man niƙa ko Emulsion azaman Mai jarida don cimma sakamako mai kyau kuma mai sheki akan ko dai zafi ko sanyi birgima na bakin karfe ko coils.An tsara injin don ƙarewa A'a dogon layi).ZSSAn tsara PL don sanyitakardar zuwa takardar niƙasarrafa daga600 ku2200 mm nisa da kauri tsakanin 0.4 zuwa 3.0 mm.
Layin Niƙa na PGL don Babban Faranti
Abokin ciniki:西部金属
Cikakken niƙa ta atomatik da Layin goge baki ana amfani da shi musamman don kawar da lahani daga yin birgima mai zafi, ƙwanƙwasa & aiwatar da cirewa da sikelin saura, da cimma kauri da ƙima da ake buƙata.Mai sanyaya na iya zama emulsion ko man ma'adinai.Tsarin tacewa mai sanyi da tsarin sake amfani da su yana da mahimmanci ga cikakken layin.ZSPGLAn tsara shi don sarrafa faranti mai zafi mai zafi daga 600 zuwa 2200 mm nisa da kauri tsakanin 1.0 zuwa 30 mm.WUXI ZS kuma yana ba da PGL bushe.
Injin Ƙarfe (8K) don Bakin Karfe Plate
Abokin ciniki:新华医疗
Fa'idar WUXI 25 Injin Kammala Madubi don Bakin Karfe Coil da Sheet.Shuwagabannin gogewa na kowane rukuni na iya zama masu zaman kansu ko kuma a haɗa su litashi sama da ƙasa .Cibiyar Refiling na polishing fili don kauce wa saman karkashin polishing disc samu burnt.Bakin karfe da aka yi .Anti lalata da tsayirayuwa.Motsi mai laushi mai laushi ta jagorar madaidaiciya.
Injin Kammala madubi don Cold Rolling Coil da Sheet
CLIENT:MINOX(INDIA)
Nau'in nadi.Yana amfani da guduro bonded dabaran nika, Scotch-Brite Disc, polishing fili wanda ya ƙunshi 5% Al2O3 + 5% nitric acid + 90% ruwa don inganta yanayin roughness mataki-mataki, a ƙarshe za a iya samun kammala babban madubi (8K).
Na'urar Loadwa/Aiki ta atomatik tare da Rukunin Kofin Vacuum
Abokin ciniki:博海金属
Ya ƙunshi firam ɗin gantry da aka yi da welded, carbon karfe da girman da ya dace don tallafawa damuwa na aiki.Na'urar ta ƙunshi ƙungiyoyi masu zuwa: Naúrar Fassara, Naúrar ɗagawa, Naúrar ɗaukar Vacuum.
Ƙungiyar fassarar tana jagorancin jagorar layi, wanda motar servo ke motsa ta ta kayan aiki da pinion.Ƙungiyar ɗagawa tana jagorancin jagorar layi, wanda piston pneumatic ke motsawa.Nau'in karban yana kunshe da sandunan riko guda 3 masu daidaitawa tare da kofuna na tsotsa guda 18, sandar tana cikin tsayayyen wuri amma kowane kofin tsotsa zai iya motsawa a tsayi, mai aiki zai iya sakin kayan aiki, daidaita matsayin kofin tsotsa, sake kullewa. daidaitawa sauƙi.
Kowane kofin tsotsa yana da alaƙa da bututun huhu na mutum don tabbatar da ingantaccen aiki na tsarin, kowane kofin tsotsa yana da alaƙa da arbor na bazara don tabbatar da isasshen sarari tsakanin kofuna da yanki na aiki.
Laminator Na atomatik don Kariyar Fim (Na'urar Rufe PVC)
Abokin ciniki: LAUNIN KARFE(ITALIYA)
Ana amfani da na'urar laminator ta atomatik / na'ura mai rufi na PVC musamman don Lamincin Fim akan saman Sheet.Ana iya ƙera shi don Laminating Layer na gefe biyu.
Lamination ta atomatik, Yanke ta atomatik.
* Yanayin Inji: 400-2500 Nau'in
* Nisa Mai Aiki: 400-2500MM
* Gudun Aiki: Kafaffen Gudun Gudun Daidaitacce
* Aikace-aikace: Ana amfani da wannan na'ura galibi a cikin Coiler/De-coiler System,
Injin goge goge, Injin goge madubi na 8K, Yanke zuwa Layi mai tsayi,
Injin Niƙa da dai sauransu.
* Injin na iya zama wanda aka kera.